Display of product

Hi,

I am using Hikashop Starter. My site is naturalsports.cloudaccess.net/ .

So far I have setup several products under reels/baitcasters.

When selecting a specific product, I have three questions:

1) When selecting the product, is jumps to the individual product page however my homescreen slideshows still remain above the individual product. It also cause a jumping down effect which is annoying. How do I set Hikashop to jump to a page without these top modules showing? I would assume it has something to do with the display of modules but unsure as it rates to Hikashop.

2) When selecting the product, the product image an associated space has a preset size. I am trying to develop a bunch of product graphics however before I do, I would like to make sure the size is set correctly, to remove all the white space between the product image and the associate content below. How do I adjust the space?

3) I see 'Products' and 'Categories on level 2' at the bottom of the product page. I thought I had deselected the modules/options but they still remain. Any suggestions on where to look so I can remove them?

All, thanks for your help with these

Martin

Hi Martin,

1. You'll be able to control the displaying of your modules by :
- Going to the Hikashop configuration page of this module ("Hikashop->Display->Views")
- Using the "Joomla module options" button
- Using the Module Assignment option.

2. You'll probably be able to do it by using some CSS code.

3. The solution will be to unpublish your modules through the "Modules under the product page" option via "Hikashop->System->Configuration->'Main'".

Okay, I resolved points 2, 3 but still not sure about 1.

You referenced: 1. You'll be able to control the displaying of your modules by :
- Going to the Hikashop configuration page of this module ("Hikashop->Display->Views")
- Using the "Joomla module options" button
- Using the Module Assignment option.

Unfortunately, when I go to views, I dont see "joomla module Options" button. I see a list of templates but no button.

Any chance you can add more detail?

Cheers,

Martin

Yes, this worked. Thank you.